Tractors & Equipment Online Monthly Specials

TE Parts Crib Monthly Specials, Page 2

Note:

they must be matched in exact gear tooth count. On these boxes the blade arcs overlap. If they aren't the same, the blades will strike 

  • during the operation causing damage to the blades, boxes and the cutter itself. 
  •  If you have any questions at all regarding gearbox suitability, whether your existing box is compatible with a new box, Please call us at 937-242-6637

01-114 / RC61



75hp to 90hp Gear box

$425.00 Includes S/H

The 01-114 / RC61 Gear box is rated from 75hp to 90hp. This box is commonly used on medium to heavy duty 5', and 6' cutters, some 7' cutters, and 8' and 10' multiple gearbox cutters. Please see note below.

  1. It has a diamond shape mounting bolt pattern with 4 3/4" between bolt centers. (On this gear box one bolt hole is directly under the input shaft.) 
  2. The input shaft is 1 3/8" 6 spline. 
  3. The output shaft is 1.96" 15 spline 
  4. The gear ration is 1:1.46 (19 teeth on the input shaft gear, 13 teeth on the output shaft gear)

01-034 / ITG 75S / RC71

100 hp + Gear box

$495.00 Includes S/H

The 01-034 / ITG75S is generally rated at over 100hp and is used on many Heavy Duty applications. Everything about this box is built for hard work. This box is commonly used on HD6' and 7' cutters.

  1. It has a diamond shape 4 bolt mounting pattern with 4 3/4" between bolt centers. (On this gear box one bolt hole is directly under the input shaft.) 
  2. The input shaft is 1 3/4" 20 Spline 
  3. The output shaft is 1.96" 15 spline 
  4. The gear ration is 1:1.46 (19 teeth on the input shaft gear, 13 teeth on the output shaft gear) 
  5. This box is compatible with several Alamo Group boxes, especially Rhino.

MX 5 and MX6 Gearbox (Made In Spain) Rebuild Kit DE19106A Kit
In Stock

Replacement gear set for John Deere MX5, and MX6, mowers including a new output shaft, new ring gear, input seal, output seal and rear rubber cap.

The gear on the shaft has 13 teeth, the ring gear has 22 teeth. 1:1.69 Ratio

Fits MX models with Iberica (Made In Spain) gearbox:

  • 13 tooth pinion with shaft, 15 splines at bottom of shaft for blade carrier 
  • 22 tooth ring gear 
  • New input seal 
  • New output seal 
  • New rubber cap for rear of gearbox
  • (1) T115842 Output bearing
    This gear set will fit in all of the MX boxes made in Spain.

$299.00
Includes S/H

MX 7 and MX8 (Made in Spain) Rebuild kit DE19034
In Stock

MX 7 and MX8 Gear Set for the Iberica Box (Spanish Box)

The MX 7 and MX8 have a ratio of 1:1.47 Gear teeth are 22 input and 15 output:

  • 15 tooth pinion with shaft, 15 splines at bottom of shaft for blade carrier 
  • 22 tooth ring gear 
  • New input seal New output seal 
  • New seal cap for rear of gearbox 
  • Fits existing stump jumper
  • No need to exchange both gear sets on the MX8
This gear set will match your existing gear box.

$555.50
Includes S/H

MX 10 (Made in Spain) Rebuild kit DE19036
In Stock

MX10 Gear Set for the Iberica Box (Spanish Box)

The MX10 has a ratio of 1:1.22. Gear teeth are 22 input and 18 output

Fits MX10 models with Iberica (Made In Spain) gearbox:

  • 18 tooth pinion with shaft, 15 splines at bottom of shaft for blade carrier 
  • 22 tooth ring gear
  •  New input seal 
  • New output seal 
  • New seal cap for rear of gearbox 
  • Fits existing stump jumper
No need to exchange both gear sets.
This gear set will match your existing gear
box.

$555.50
Includes S/H

m>

This is the replacement output shaft for 

the MX Chinese gear boxes.


 The part number is W52915Kit 


 Kit includes Input seal, Output seal, and The seal cap for the rear of the box 


 This shaft is used on every Chinese MX cutter 5ft thru the 8ft. 

Please note: The MX10 Chinese gear box uses a different shaft,

This shaft will not fit!

$535.00
Includes S/H